CONSTRUCTION:  The manufacturing process begins with a billet of high-density tungsten. First, the billet is center-ground and shaped. Then, the point and shaft cavities are drilled and threaded. The barrel design gives you the best of both worlds? Slightly front-weighted for stability and increased accuracy and a slim profile for more precise dart patterns. The process of applying grooves or knurling (for grip and release) is now begun. After all tooling is completed, the barrel is re-checked for proper weight.

COATINGS:  Darts are normally coated by painting or baking the substance onto the barrel. "Widows" are vapor-coated in high heat furnaces that fuse mixtures of titanium/tantalum nitride and titanium carbide gas to the tungsten barrel. Each barrel receives three different coatings before the process is completed. These multi-layered coatings provide an ultra-hard "textured" finish for both unmatched gripping qualities and a starling appearance.

LIFETIME GUARANTEE on each barrel. (Coatings not guaranteed against normal wear.)

• Barrel:  High Density Tungsten - Slim Front-Weighted Design - 3-layered gold colored coatings.
• Point:  2ba soft tips
• Shaft:  "Widows" are supplied with the unique "Spider Leg" shaft.  Instead of slots, four high tensile strength wires are anchored in an aluminum base and covered with heat shrunk rubber to give a firm hold on the flight.
• Extras:  Deluxe case with extra flights,  shafts, tips,  and a dart mechanic tool.
• Available Weights:  16, 18, 20 Grams